Assign Bin

  • The system now prevents you from assigning a new bin to an item if the tag has a quantity of 0. (40947, 2023-09-25)

Book to Physical

  • Improved the way the system reacts when you scan a mill tag ID in book to physical mode that has already been scanned. (46687, 2024-08-07)
  • Corrected issue in which certain tags were not able to be scanned for book to physical count. (46430, 2024-07-29)
  • Validations now prevent book to physical scans if an item is not frozen properly. (46410, 2024-07-29)
  • Values on the Totals by Product tab are now correct when you count a product that is associated to multiple bins. (46507, 2024-07-30)
  • Eliminated "Insufficient bin quantity" error that would sometimes display based on a rounding issue. (43175, 2024-02-08)
  • Corrected several issues that occurred when you proceed book to physical counts on non-tagged items. (42512, 2024-03)
  • Improved the way the system freezes tags for counting and calculates product quantities when you select a parent product that contains remnant children products. (42109, 2023-12-07)
  • Eliminated "unexpected error" that occurred when you scanned an inventory tag in book to physical mode. (41467, 2023-10-26)

Create Remnant Tag

  • When you create a remnant, the system prompts to ask which stock product the remnant came from. The validation is now at the parent product (RB0560) level, rather than the length-oriented sub-product. (26247, 2023-10-25)
  • If you accidentally double click in the Create Remnant Tag screen, the system no longer generates two remnant tags. (41621, 2023-11-08)

Generate Inventory Tags

  • Addressed an issue in which pending tags could not be printed. (47013, 2024-08-20)
  • Improved validations that occur when you are activating stock tags from coil and the total coil weight is exceeded. In this scenario, an appropriate message now displays. (44642, 2024-04-23)
  • If you create stock items by coating black bar, you can now print inventory tags for the new coated items in the shop from your mobile scanner. (40209, 2023-10-27)
  • You can now generate inventory tags for stock kit products, even if the products were created before the "Generate Inventory Tags" feature was implemented for stock kits. (40503, 2023-09-27)

Heat Inquiry 

  • When you drill down to view Tag information, this data now displays correctly. (45885, 2024-07-03)
  • Eliminated "replace" error that could display in certain circumstances when you attempted to print the inquiry. (45656, 2024-06-21)
  • Eliminated HTTP 500 error that occurred when you attempted to print the inquiry and the ID was all numeric. (44677, 2024-04-26)
  • Eliminated timeout issue that occurred with control codes that had 700+ tags and multiple heats. (42391, 2023-12-26)
  • When you print the order report and shipping ticket from Heat Inquiry, the system now produces the document(s) based on your System Manager > Location > Forms settings. (31576, 2023-10-13)

Import

  • Improved SmartMatch product lookup used for Auto-generate Blank Inventory Tag feature. (46176, 2024-07-12) 
  • When you import tags with "no heat," the associated mill is now saved correctly. (41281, 2023-10-16)
  • You can now import remnant tags regardless of whether you use Inventory Management. (41255, 2023-10-17)
  • The system now prevents non-parent tags from being imported as remnants. (41094, 2023-10-05)

Inquiries

  • Eliminated run-time error that could occur when you quickly switched Load By criteria. (44326, 2024-04-04)
  • Type-ahead now works properly when you select data in Heat Inquiry. (39832, 2023-08-01)

Inventory Tag Adjustment

  • Eliminated a temporary issue in which Adjust, Relief, and Receipt did not work on mobile trackers. (41421, 2023-10-24)
  • Eliminated erroneous validation error that sometimes displayed when you adjusted a tag quantity to 0. (40928, 2023-09-28)
  • You can now adjust coil tags from a scanner. (40725, 2023-09-14)
  • When you adjust inventory tags, the GL account now defaults in based on the reason code and GL account type. Related WIP accounts are updated when applicable. (40325, 2023-08-25)

Inventory Tracking

  • When you can a master bundle tag to indicate a storage area, the program now automatically "moves" all the item tags that belong to that master bundle tag to the assigned storage area, regardless of their previous locations. (45349, 2024-06-09)
  • For shops with post-fabrication activities, such as coating, the system now properly handles inventory updates when a user performs an Undo or Void on a shearing or bending scan. (45009, 2024-05-16) 
  • Improved the way the system handles a reverse WIP transfer, for example, when a user scans a tag then selects Undo or Reset. (45008, 2024-05-17) 
  • When you create a remnant tag from a mill tag, the mill tag ID now displays as the parent on the remnant tag. This is consistent with how it handled on dashboards and inquiries. (44114, 2024-03-25)
  • Corrected issue in which stock tags with certain formatting did not import correctly. (43699, 2024-03-01)
  • When you close a coil bundle on the TouchTracker, the bundle status is now updated correctly on aSa.Studio screens. (41000, 2023-09-29)

Load Tracking

  • Validations prevent you from adding material to a load if the load is associated to a shipping ticket that has been shipped. (46991, 2024-09-06)
  • Loading by picking mode now works in environments where material is stored in staging area prior to loading. (45070, 2024-05-20)
  • Improved validations to ensure that an item tag cannot be added to a master group tag after the master group has been loaded. (45095, 2024-05-21)
  • If tag unit of measure and inventory unit of measure are not identical, but they are equal (example: EACH and PCS), you can now use the picking functionality to load stock items from inventory. (44950, 2024-05-15)
  • Improved validations to prevent items from being loaded on a dynamic load if they were previously pre-assigned in Load Building. (43267, 2024-02-14)
  • Corrected an issue in which you could not load certain miscellaneous items with the material picking method; the issue was related to units of measure. (41886, 2023-11-27)
  • When you cannot generate a shipping ticket from a mobile tracker because the form is not defined, an appropriate message now displays. (41771, 2023-11-29)
  • Eliminated "inventory" error that occurred in certain unique circumstances when you attempted to reprint or rescan a tag that was already loaded. (41436, 2023-10-27)
  • A new mode lets you associate miscellaneous items loaded for shipment to the specific inventory tags they were relieved from; this new mode is called Material Picking. You must use this mode if you use Inventory Management; if you do not use Inventory Management, it is optional. (41208, 2023-10-30)
  • Improved performance for validating master group tag scans; eliminated time-out issues. (41453, 2023-10-26)
  • Improved validations that occur when you ship and load on-hand remnant material as stock. (40383, 2023-08-31)

Master Group Tags

  • When you scan a master group tag, and item tags contained in the group have validation errors (for example, they must be cut or bent), a window now displays each tag and validation message. Previously, a single non-specific error displayed. (45707, 2024-06-24)

Opto-Shear Console 

  • When you perform an adjustment, you are now prompted to enter a reason code. (40362, 2023-09-08)

Production Tracking

  • Coil estimate data now refreshes more regularly. Previously, the value could be a "step behind" actual tags processed. (42760, 2024-01-19)Improved validations that occur when two TouchTrackers are connected to the same machine and separate users begin working simultaneously. (41717, 2023-11-16)
  • Updated the interface to include more information. Pin Diameter and Shop Message now display. (40483, 2023-10-24)
  • Improved validations that occur when you scan a master bundle tag. Previously, the system was always assuming the master bundle was at a loading station, when it actually could be being placed into storage. (40387, 2023-09-08)

Receipts

  • Eliminated error that occurred importing certain specific mill tags. (46237, 2024-07-17)
  • The PO reference can be set or changed at any point while the receipt is open on the scanner; scanner and Studio screens reflect changes in real-time. (41610, 2023-11-06)
  • If you create a blank receipt, save it and reopen it, you can now import material for that receipt. (41565, 2023-11-01)

Reports

  • Customer ID and Name now display properly on Heat reports: Heat Summary, Heat Details, Item Tags by Heat, Heats by Item Tag. (46029, 2024-07-03) 
  • The Downtime Inquiry now prints correctly. (45929, 2024-07-08)
  • A new option allows you to display coil summary information on its own section of the Tagged Inventory report. (43878, 2024-03-13)
  • When you automatically print the Order report and Shipping Ticket with the Heat report, the system now uses System Manager > Location > Forms to determine the report settings. (31577. 2023-10-13)
  • Coil products now display on the Tagged Inventory report. (42078, 2023-12-08)
  • The Tagged Inventory report and Tagged Inventory Usage report now display only summarized information. (To see individual tag data, create a dashboard.) (39859, 2023-08-11) 

Reprint 

  • Pending remnant tags no longer display in the selection list in the Reprint utility. (41025, 2023-010-03)

Warehouse Transfer

  • You can now perform warehouse-to-warehouse transfers using a mobile scanner. (30887, 2023-10-13)