Delete Orders

  • If you attempt to delete an order that is associated with a voided shipment, the system now displays an appropriate warning and automatically sets the order to inactive. (28015, 2021-11-11)

Excel Import

  • Corrected issue in which certain slope legs with a dimension entered as an angle (<40) did not import properly. (35266, 2022-12-01)

Get Order Data

  • Corrected issue in which "Legacy and non-legacy shapes cannot be on the same order" displayed erroneously when the control codes contained certain specific shapes. (35282, 2022-12-03)
  • Corrected issue in which a line item originating in Get Data could not be deleted in certain circumstances. (33201, 2022-08-29)
  • Corrected issue in which Get Order Data did not work because of country restrictions. (31917, 2022-06-14)
  • When you get data from an Excel file that contains elements, element info now imports and displays properly in the grid. (31466, 2022-05-17)
  • Corrected erroneous "missing length" error that occurred when you tried to import takeoff data from an Excel file. (30101, 2022-02-28)
  • You can now launch Get Order Data without issue, regardless of the Line Entry view scheme you are using. (28126, 2021-11-09)

Line Entry

  • Corrected an issue in which bent bar legs on a varying item were incorrect on the shape picture. (39302, 2023-06-27)
  • Eliminated a very rare issue in which a valid order line was replaced by an item with no product information. (38545, 2023-05-18)
  • Eliminated timeout error that occurred when you entered items in Order Entry in certain circumstances. (38164, 2023-05-01)
  • Corrected issue in which members of a varying set were treated as unique with fractionally different lengths when they should have been created and stored as two pieces of the same item. (37200, 04-14-2023)
  • When you create an on-the-fly shape in No Picture mode and specify an BCD override, the BCD information is now applied and saved properly. (37966, 2023-04-19)
  • Eliminated issue in which a random error occurred with certain unique orders when you re-opened an existing control code, then clicked Line Entry. (37199, 2023-03-09)
  • Eliminated issue in which incomplete random bar information displayed erroneously in the last blank line of an element. (37117, 2023-02-22)
  • Eliminated slowdown issues that could occur when you entered straight bars with non-unique bar marks. (37119, 2023-02-24)
  • Eliminated error that occurred in certain scenarios with BSI building code and varying sets. (34003, 2022--10-03)
  • Bend Curvature Deduction (BCD) is now calculated correctly when you override the pin size, and the bar is a custom 3D shape. (33133, 2022-09-30)
  • Eliminated issue in which you could not enter a BTO kit with certain custom shapes. (33565, 2022-09-19)
  • Eliminated issue in which you could not save BTO kit line items in certain unique circumstances. (33725, 2022-09-20)
  • Eliminated issue in which row action buttons (Move, Cancel, Delete) disappeared in certain unique circumstances. (32928, 2022-08-17)
  • Eliminated rare issue in which the system inserted a blank row in the middle of the Entry grid. (32794, 2022-08-08)
  • You can now cancel and close the Span / Spacing window using the keyboard: arrow to Cancel and press Enter. (32518, 2022-07-26)
  • When the length unit is set to millimeters, entering a decimal meter value (15.0) automatically converts to millimeters (15,000). (32284, 2022-07-15)
  • Corrected an issue in which the cut weight for certain bent bars was not calculated correctly. (32357, 2022-07-20)
  • Eliminated issue in which certain stock rebar products could not be added to an order. (31920, 2022-06-14)
  • Improved product validations for items associated to a country. (31563, 2022-06-07)
  • Eliminated "Multiplicity constraint violated ..." error that occurred when you changed the quantity of a marked item after populating an order using Get Data. (31673 2022-05-31)
  • Eliminated "Multiplicity constraint violated ..." error that occurred when you edited the length of a bent bar that originated in a file imported form Excel. (31423, 2022-05-31)
  • When you enter a very long Element description, the text now wraps when applicable. (31457, 2022-05-16)
  • When you set field options to skip Bar Mark, the cursor now skips over the field as intended. (31538, 2022-05-18) 
  • Enhanced the system to handle importing special mesh products. A flag denotes that weight comes from the import file and is not calculated in aSa.Studio. (31215, 2022-05-12)
  • Corrected an issue in which the program froze when you added an element in certain unique circumstances. (31227, 2022-05-12)
  • Using asterisk (*) in the data entry calculator no longer causes an error. (31251, 2022-04-29)
  • Corrected an issue in which orders did not save properly in unique circumstances involving BTO kits, elements, and certain edits. (31315, 2022-05-03)
  • When you insert a line in a long order, the focus remains at the insertion point. (31358, 2022-05-06)
  • Shortcut keys * and / now correctly translate to angle (<) when appropriate when you are entering dimensions. (30772, 2022-04-05)
  • When you use Replace on multiple lines, and the change requires a new manual bar mark, the process no longer stops after you assign a mark to the first item. (30770, 2022-04-01)
  • Find and Replace now work properly with orders that have multiple elements. (30213, 2022-03-07)
  • You can now change the vary code when you edit an existing vary set. Bar marks are automatically re-assigned if necessary. (30208, 2022-03-07) 
  • Added Select All and Unselect All to the Edit (pencil) dropdown. (30198, 2022-03-07)
  • When you create a vary set using Same mark, then copy and paste the set, the system now retains the bar mark; previously, it was automatically changing. (30144, 2022-03-09)
  • Corrected cursor focus issues that occurred when you entered a vary set. (30419, 2022-03-02)
  • The Takeoff grid now scrolls properly when you scroll through items spread across multiple elements. (29882, 2022-02-14)
  • Improved calculations for products that use the unit of measure square meters. (29866, 2022-02-15)
  • When you enter a varying set for bars with hooks that use non-standard pin sizes, the pin size and bending calculations are now handled correctly. (29911, 2022-02-15)
  • The program no longer freezes when you enter a vary set with bent bars. (29826, 2022-02-11) 
  • If enter an existing bar mark but change values, the system prompts you to overwrite the bar mark. The message now defaults to Cancel (do not overwrite existing values). You may still select OK or Cancel as needed. (29750, 2022-02-03)
  • Improved performance for displaying the shape lookup. (29465, 2022-01-14) 
  • Corrected an issue in which you could not create a quote if certain Environment options were set. (29512, 2022-01-14)
  • Product Comment and Long Placing Note field labels now display properly; previously, 'String not found' displayed. (29507, 2022-01-17)
  • Eliminated problems related to copying an element and pasting it multiple times. (29545, 2022-01-19)
  • If the dimension entered for a leg produces an error, that leg now highlights in the picture for your reference. (28853, 2021-12-17)
  • The quantity for mesh items entered in square meters now calculates properly. (29134, 2021-12-27)
  • Shape messages defined for custom shapes now display properly on the picture. (29087, 2021-12-15)
  • When you copy an Element, you now have the option to copy just the element details, and not the associated line items. (28851, 2021-12-06)
  • When you vary the leg of a bent bar, the leg is now highlighted in the shape picture. (28850, 2021-12-07)
  • Eliminated an issue in which the Attach field was not set properly for bar with end preps. (28627, 2021-11-22)
  • In the Shape field and palette, you can now search based on "Begins with" and "Contains" filters. (28286, 2021-11-04)
  • Validations now prevent you from copying a bar mark, then renaming it to be longer than the maximum character limit during the copy process. (27602 2021-11-09)
  • You can now override the assigned pin diameter. If you are licensed for Processing, you can select any pin defined for the associated machines. If you do not have Processing, you can type in a pin diameter. (28001, 2021-10-18)
  • Improved functionality to enter and track mesh manufactured from rebar. (27519, 2021-10-01)
  • The system now saves the modified date for each line when it is added. This information is available for display on custom dashboards. (26028, 2021-09-01)
  • Implemented improvements to make assigning tags colors and symbols more flexible (24783, 2021-05-12)
    • You can now set up default tag symbol and color for the order.
    • You can now apply tags colors and symbols for all lines, even comments.
    • When you change tag symbol or color on a line item, the system prompts you to apply the change to all items in the element. 

Print Tags

  • Eliminated run-time error that could occur when you printed tags from Order Entry and the order contained on the fly shapes. (28848, 2021-12-03)

Reports and Inquiries

  • Eliminated error that occurred in certain circumstances when an order contained shapes with decimal values in dimension fields. (38930, 2023-06-07)
  • When you apply a filter to include or exclude inactive control codes for Order Report creation, the list of control codes now filters properly. (38151, 2023-05-02)
  • Corrected issue in which certain custom versions of the Order report did not preview correctly. (25698, 2022-12-28)
  • Eliminated weight discrepancies between the Order report and Shipping Ticket that could occur in certain circumstances. (35697, 2022-12-23)
  • When an order contains different material types, such as deformed and plain, the material "headers" above each section on the report now display the proper characteristics. (35049, 2022-11-21)
  • Corrected issue in which data did not correspond to the table heading in certain report lookups. (34535, 2022-10-27)
  • Corrected an issue in which the Order report did not generate in certain circumstances. (33102, 2022-08-23)
  • When an order contains marked straight and bent bars, the report now separates and sorts items correctly. (32666, 2022-08-03)
  • Corrected issue in which certain companies' order reports did not include shapes. (31878, 2022-06-14)
  • Corrected issue in which certain companies' order reports did not display length dimensions using the Order Default setting. (31615, 2022-05-29)
  • Performance improvement: Reports for orders that contain mesh and accessories now print faster. (31503, 2022-05-19)
  • You now have the option to include component weights in the bar diameter summary on the Order Report. (31380, 2022-05-13)
  • When you set up report filters by Promise Date, the correct orders now print. (31108, 2022-04-22)
  • When you add items from a master order to the current order, weights are now calculated and displayed properly on reports. (30500, 2022-03-22)
  • Corrected issue in which the wrong product codes displayed on the Order Summary in certain unique circumstances. (29839, 2022-02-11)
  • Corrected issue in which dimensions were cut off at the top and/or bottom on some shape pictures. (28894, 2021-12-05) 
  • The Length Summary section of the report now displays weight for straight and bent bars. (28070, 2021-10-14)

Setup Screens

  • Corrected issue in which the wrong name appeared as a contact in the Shipping/Billing screen in certain circumstances. (33922, 2022-09-29)
  • If an order is on a shipping ticket that has not yet been finalized, you can now change its shipping address in Order Entry. (28591, 2021-11-18) 
  • When you set the numbering macro for release number to include preceding zeros, the zeros now display where applicable. (28566, 2021-11-18)
  • A new location option allows you to specify whether Description is required or optional in Order Entry. 24096, 2021-07-13)

Split Orders

  • Enhanced the program to improve performance and eliminate lag time when you split an order. (30212, 2022-03-07) 
  • Corrected a weight discrepancy issue that occurred in certain circumstances when you used Split > Move and split the quantity of a line item. (29741, 2022-02-02)