Book to Physical

  • The system now prevents a tag from being transferred if it is currently part of active physical count. (5106, 2025-06-09)
  • When you perform a physical scan, user and time stamp data are now saved. (4739, 2025-05-15)
  • Addressed issue in which the Book to Physical screen did not update properly when you scanned a tag in BPT mode and set the target bin but did not enter a quantity. (1250, 2024-12-12)
  • Corrected an issue in which the mobile tracker sometimes displayed an erroneous percentage value for for the quantity of coil items. (48254, 2024-10-16)

Inventory Tracking

  • Added checks to prevent multiple Update Quantity windows from launching at the same time. (5237, 2025-06-12)
  • Corrected an issue in which the system allowed stock bars to be loaded without associated inventory being open. (4009, 2025-04-09)
  • Corrected an issue in which the system allowed bars with end preps to be loaded without associated inventory being open. (4009, 2025-04-09)
  • When you receive material against a PO via scan, units and quantities are not handled correctly. (3465, 2025-03-12)
  • Addressed issue in which you could not activate a remnant from the aSa Opto-Shear in certain circumstances. (3436, 2025-03-07)
  • Corrected an issue in which certain inventory validations were not happening if your system had multiple warehouses. (3095, 2025-02-22)
  • Where appropriate, inventory is now validated, regardless of whether you are licensed for Inventory Management (2814, 2025-02-14)
  • Corrected an issue in which used up coil stock wasn't properly set to 0 weight. (2532, 2025-02-05)
  • Eliminated "Server error" that could occur in certain unique circumstances when you attempted to close a bundle. (2133, 2025-01-21)
  • When you set the coil quantity of a stock tag to be 0, then adjust it be greater than 0, the tag is now valid.(1244, 2024-12-12)

Inquiries

  • Shipment Lines data can now display date information in mm/dd/yyyy format. (1594, 2024-12-16)

Inventory Validation

  • When you turn on Validate Inventory for Mesh, the system now validates open stock items correctly; previously, an erroneous "does not match item tag" error would occur in certain circumstances. (4944, 2025-05-29)
  • Improved validations that occur when you substitute material from one grade for another. (910, 2024-11-22)

Load Tracking

  • Improved mobile tracker validations for stock loading and picking activities based on whether picking is active for the location. (5249, 2025-06-24)
  • When you finalize a load that contains an order with some direct ship items, those items are how tracked properly. (5546, 2025-06-20)
  • Eliminated timeout issue that occurred with counter sale-triggered shipments. (5298, 2025-06-17)
  • Added validations to better handle the following situation: You finalize a load, then add a new bundle to the load in Scheduling, then scan to validate the new bundle for loading. (5214, 2025-06-10)
  • If you are set up to use material picking for miscellaneous products, you can now do so even if you don't print processing tags for these items. (4726, 2025-05-16)
  • When you use Remove from Load, the correct inventory-related prompts now display on the mobile tracker. (4429, 2025-04-29) 
  • If you are set up to allow multiple loads per trailer, and you add multiple loads onto a trailer, the “Add Load” prompt now displays only once (as designed), not multiple times. (4397, 2025-04-23) 
  • Corrected an issue in which a load could not be finalized in certain scenarios. (4318, 2025-04-17)
  • The Load Card on the tracking scanner now includes the correct load count when the load includes Vary Summary Tags (a single tag to identify a varying group of items). (4039, 2025-04-14)

Lot

  • When you save a Lot, the screen correctly displays. (48696, 2024-11-08)

Production Tracking

  • Addressed issue in which the system attempted to validate connectors when they were not set to validate. (5301, 2025-06-18)
  • When you perform a series of scans to place an item in a storage area, then Reset, the storage area assigned to the tag now clears properly. (5252, 2025-06-12)
  • The system now validates and tracks end prep operations correctly. Previously, it was rejecting scans in certain circumstances. (5052, 2025-06-02)
  • Addressed an issue in which you could not start downtime manually. (4713, 2025-05-13)
  • Improved the way Vary Summary Tags (a single tag to identify a varying group of items) are handled: (4039, 2025-04-14)
    • You cannot add a VST to group tag.
    • The Not Loaded Inquiry now includes the correct bundle count
    • The Load Card on the tracking scanner now includes the correct load count
  • Addressed an issue in which, in very unique circumstances, scanning a master bundle tag triggered a load transaction when it should have triggered an "Item must be cut" validation. (4345, 2025-04-17)
  • Improved validations that occur when you fabricate from coated stock. (1672, 2025-01-06)
  • Material validations are now correct for orders set to Domestic (Mixed). (1657, 2025-01-06)
  • Added support for Grouped varying sets - scanning the Group Vary Set tag marks the entire set as complete. (200, 2024-11-26)
  • When the processing tag has a country requirement, the Epoxy Spiral machine correctly handles inventory validation. (48674, 2024-11-06)
  • If you attempt to process a straight sheared item on a coil machine, an appropriate message now displays. (48404, 2024-10-25)

Web Tracker

  • When you view a list of open bundles, the list is now sorted by time open, oldest to newest. (47706, 2024-09-18)

Receipts

  • If you begin typing a product, then click the Lookup, the program no longer gets stuck with a "line still being evaluated" message. (3821, 2025-03-27)
  • Corrected issue in which the screen would sometimes appear to freeze when you attempted to post a receipt. (942, 2024-11-22)
  • Eliminated problem in which you could not receive material via scans due to erroneous multi-currency data checking. (947, 2024-11-22)
  • Corrected an issue in which the system displayed "Invalid Division" when you scanned a mill tag even though division is not required for import. (1007, 2024-11-20)
  • Corrected an error in which certain locations could not import stock material via scans due to an issue with currency data. (48857, 2024-11-14)

Remnant Import

  • Corrected an issue in which tags imported from remnants were incorrectly associated with a blank heat. (48258, 2024-10-29)

Reports

  • When you filter a report to show only Remnant or Stock, the correct data now displays. (1374, 2024-12-12)

Tracking Inquiry

  • Mill Tag ID now displays correctly when you drill down on a processing tag. (2689, 2024-02-13)
  • Corrected an issue in which attached couplers did not always display as loaded. (1046, 2024-11-21)

Transfer

  • Built in validations to prevent duplicate transfer transactions; previously, the issue could happen if a transfer was initiated on a scanner and in the Transfer screen near simultaneously. (4461, 2025-04-28)